Class III  Animal Alcohol

1. Animal or Intek Block---Animal head Only

2. Stock Flywheel-----Advance Timing Allowed

3. Stock Animal “PZ” Carb.—Air Filter must Clamp directly to carb. No velocity stacks. Items that hang down from Carb with bowl off—non tech items.

4. Any Stock Length Rod may be used.

5. Stock Animal Piston Installed as from Factory with max. .030 oversize bore. Piston Pop-up +.005

6. Stock Animal Crank with Stock Stroke.

7. Camshaft will be profiled using degree wheel.

8. Cam Lift Max. .257—measured at push rod.

9. Gross Valve Lift .252---measured at valve retainer

10. Any stock WKA Cam. No tool steel billit.

11. No modification to Cylinder Head.

12. No porting or polishing to Cylinder Head.

13. Combustion Chamber Floor Depth no less than .319

14. Squish Band around Plug area no less than 0.110

15. Valve Length 3.272 +or- .010

16. Stock Valve guides.

17. Stock or Stock Replacement Valve Springs.

18. Stock Valve Lifters.

19. Stock Rocker Arms.

20. Stock Push Rods.

21. Stock Valve Cover with working Baffle.

22. Fuel Pumps Allowed---pulse line to top oil.

23. Fill Hole on side cover only.

24. Fuel is Alcohol only—no additives.

25. Any starter Allowed.

26. Any centrifugal, disc clutch, or needle bearing clutch allowed. No wet type.

27. Any flanged Exhaust.

28. Any Racing Tire.

29. Minimum Weight for Kart&Driver is 335lbs.